Linksys WRT160N Setup Following This Thorough Guide

Since the Linksys WRT160N router provides stable WiFi connectivity, it is considered to be the users’ first pick. With Linksys WRT160N setup, you can experience added benefits. Linksys routers’ wireless feature allows users to connect multiple devices to the same WiFi network.

Linksys WRT160N router belongs to the group of N series routers that Linksys designs. Besides, this router device is considered to be a cable router since the Linksys WRT160N router operates with a cable service provider.

To sum up, all the features that Linksys as a router brand is providing, it makes many users switch to setup Linksys router WRT160N at the first place. Therefore, in this article, we have come along with a thorough guide that will help you to set up your Linksys WRT160N series router in no time.

Setup Linksys Router WRT160N Router without Using A CD

So, before you set up the Linksys WRT160N router, you need to configure your router without CD. To setup Linksys WRT160N router without using a CD, we recommend you to go through these steps.

Note that you can choose to run the CD or the installation application if you own one for your Linksys router device.

1. To start, ensure that you connect your computer to a stable internet connection through a modem.
2. Next, you can connect your computer device to the Ethernet cable. Also, you need to plug the internet network port of your Linksys router.
3. Now, take a look at your router’s light status. Make sure your router is receiving the network connection.
4. After that, you can navigate to your Linksys WRT160N setup page. Next, you have to go to the internet connection settings page. Then, you can modify your Internet Connection Settings as per your service provider.
5. When your computer gets connected to the Linksys router network, you can modify your Network Settings accordingly.
6. Now, you have to generate your new wireless network username along with a password. Make sure you note it down because you will need this while logging into your router account.
7. After that, you can connect multiple devices to the same Linksys WRT160N router.

How to Setup Linksys WRT160N Router?

Now that we are done with the Linksys router setup without using a CD, we can head to the next step. Before moving to the setup process, make sure you connect the router to the network cable. We recommend you to avoid connecting your Linksys router to the wireless connection. Moreover, you might lose your wireless network if you make any changes while connecting to the wireless network.

Step 1

To begin with the Linksys WRT160N setup process, you need to go to your web browser. Then, navigate to the search box and enter your Linksys router’s IP address. Make sure you use “http://” before typing your IP address in the search box. Moreover, if you don’t know your Linksys router’s IP address, you can enter the Run command in the Start menu. Then, you can find a command window where you have to enter your IP configuration and proceed with the Enter button. After that, you will get your local area network details from where you will get your Linksys router’s IP address.

Step 2

So, in the next step, you will be asked to provide your username as well as your router’s password. To login to your account, you need to provide the required information. Note that the default password for your Linksys WRT160N router is ‘admin.’ You need to enter this password, and for the username, you can leave that empty.

Moreover, if you have modifies your password earlier, and now you don’t remember it, then you need to reset your Linksys router to its factory configuration.

Step 3

So, now that you have successfully logged into your router’s account, you can navigate to the Wireless tab. Then, you can move to the next step.

Step 4

In the next step of Linksys WRT160N Setup, you need to check out your Primary Settings. Then, you need to enable your Linksys router’s Wireless Configuration. After that, you can go to your router’s Network Mode. Next, you have to make it Mixed. Now, you can modify your SSID. You can enter your preferred username. Here, you can see the two Radio band and Wide Channel option. You don’t have to make any changes in there; you can leave the section to their default settings.

In the SSID Broadcast section, you need to switch it to Enable. After making all these changes, make sure you tap on the Save settings option to retain the changes. Then, you can head to the next step.

Step 5

Now, in the next step, you can proceed with the Wireless Security option. In the Security Mode section. You can find various options regarding your wireless security card. Moreover, we recommend you to select WPA since it lets you to use a unique password of your own.

After setting up the security, you will able to find more boxes appearing on the screen. To set up your own wireless password, you have to navigate to the password section. Next, make sure that you tap on the Save Settings option or retain all the changes that you made so far and this how you are done with your Linksys WRT160N setup.

Get-to-Know your Linksys WRT160N Wireless Router

Therefore, now that you are all set with your Linksys wireless WRT160N router setup, you need to be aware of all these information while using your Linksys router.

The Linksys wireless WRT160N router is capable of connecting more than four computer devices. Using the Linksys WRT160N router, you can connect to multiple devices through the Ethernet cable. Moreover, if you are willing to connect more than four computer devices to the same network, then you can use a switch that will provide you with an extended number of ports. When you use a switch, the Linksys WRT160N router allows you to connect more than 32 wireless computing devices in the same wireless internet network.