Linksys RE7000 Setup | Complete Installation Guide

Linksys stands among the most popular names that provide a wide range of extenders. Besides, it is designed in such a way that it runs in two different modes. The first mode includes the access point that helps to extend the range. This is one important reason why many people prefer Linksys RE7000 setup.

Therefore, in this article, we will be discussing the multiple steps on how to setup Linksys RE7000. So, first, we want you to have a look at some details that you should follow. The first thing that you have to keep on mind before setting up the Linksys router is that you need to check your wireless network connection. It ould be better if look up to all the wireless connections that you are using right now. Also, make sure that you activate 2.4GHz or 5GHz wireless network in your device.

Other than that, you should be aware of your wireless network settings. Hence, you should check your home network and recognize your username as well as your password. So, if you ever forget your network settings, the first thing you will have to do is that you need to recover them.

How to Setup Linksys RE7000 – Steps to Follow

After all this, we can move to the Linksys RE7000 range extender setup process.

Step 1

To begin with, when you first install any device, the power in it remains on. So, you need to wait for a moment so that the LED light takes the amber state and then you can move to the next step.

Step 2

Now, in the next step of Linksys RE7000 setup, you need to connect to the Linksys device through your computer and make it to the next step. Next, you will notice three xxx characters appearing along with your SSID name. These characters are your MAC address which you will find on your the rear of your router.

Step 3

After that, you need to enter your web browser. Here, you can use any web browser. Next, you need to type the following command “http://extender.linksys.com” and proceed to click the Enter button. With this, you are all set to start the wizard.

Step 4

In this step, you need to click on the Start Setup. Right after that, you will need to generate an admin password with a hint. Next, leave the page by tapping on the Save button.

Step 5

Now, you need to need to check your wireless range extender and proceed with the Next option.

Step 6

In the next step of Linksys RE7000 setup, you need to check your currently available networks. Then, you can select your preferred home network to connect. Next, you can see a pop up appearing on the screen. Here, you need to type your password and you can proceed with the OK button. In case, you fail to find your network name, we suggest you tap on the network name and password section to get your network name.

Step 7

In the next step, you can see a spot Finder page appearing on the screen. This page will allow you to analyze the power of the signal connecting your router and your extender device. If you detect that the power is low, then we suggest you place your router and your extender device closer to other so to decrease the distance between them.

Step 8

Last but not least, this process will automatically upgrade your firmware. With this, you will be able to do Linksys RE7000 setup in a go. Further, it will avoid issues like dead spots that many users find in the network usually.

How to Use Linksys Extender Setup RE7000

Now that we are successfully done with the Linksys router setup, we are set to use it. Therefore, in the above section, we are pointing out some of the things that you need to keep on your mind while using a router.

  1. Keep It Close To Your Router: Once you are set to use your router after Linksys RE7000 setup, you need to make sure that you do not move your router far from your device. This will make your signal strength poor and you will end up losing your connection. Moreover, you also ensure that you do not locate your router in a closet, or you will not be able to find the network.
  1. Update Your Firmware:  Another thing is that you should always upgrade your firmware so that your router could maintain its performance. If you use an outdated firmware, it will cause multiple errors in your device. Besides, the new upgraded firmware comes up with some bug fixes that further helps to remove glitches from your device. Therefore, whenever there is an update, you should download it to avoid any error in your device.
  1. Know The Basic Settings: Apart from that, it is important to know the Basic Settings information like the IP address and your router username along with the password. Therefore, you can go to the basic settings section and note down all your details.

Therefore, we recommend you to implement all these steps to get Linksys extender re7000 setup with ease.

Leave a Comment





Call Us Now