How to Connect and Set Multiple Monitors Windows 10 – A Thorough Guide

Configuring multiple monitors have become a usual thing today. Many people have been doing this to get a convenient multitasking experience. Having multiple monitors is confining. Thus, in this article, we have come up with the process on “how to connect and set multiple monitors Windows 10?”

People use more than one monitors for many purposes. With multiple monitors, you can experience spreadsheet placing side by side. Besides, you can write an article or some blogs while researching. In a nutshell, you can open multiple tabs for multitasking.

Using dual monitors Windows 10 makes a considerable difference. But, before you go on to the setup process, first, make sure that you have the hardware requirements for the setup in your Windows device. Hence, you can have a look down below to get all the steps for the setup.

How to Connect and Set Multiple Monitors Windows 10?

Before you go on and setup dual monitors in Windows 10, there are some steps that you require to follow. Definitely, to begin with, you need multiple monitors as well as some wires and cables. Initially, you have to check the ports on your computer device. Moreover, if you are a laptop user, then you will get only one port in your device. So, if you are using a computer device, then you already have one monitor combined with your device, and therefore, you need another one to connect to your computer.

Note that your computer is compatible with dual monitors. Besides, you need a good quality wire to set up multiple monitors in Windows 10. We suggest you use a VGA wire here. After that, you can connect the monitor and switch the power on.

Step 1: Set Up the Second Monitor

The Windows 10 Operating System comes up with four different projection modes. To enter the projection, you need to tap and hold both the Windows logo key and the P key simultaneously. After that, the first mode that you will see is the ‘PC Screen Only’ mode. In the second monitor, you will find nothing, and it will be blank. Also, you will find another mode that will help you to turn on the secondary screen. Besides, this mode is capable of turning off the primary screen. Apart from that, there are two other common modes of operation. The Duplicate mode allows the users to extend the screen just like in the secondary monitor device.

Last but not least, the Extend mode is considered to be the most important one among all the modes. This further allows the users to spread the operating area to the secondary monitor device. Basically, your dual monitors Windows 10 depends on this mode. Though this Extend mode, you can have an extended screen. Moreover, this setting procedure provides the users with a large screen. Now, you can move to the next step on “how to connect and set multiple monitors Windows 10?”

Step 2: Configure the Second Monitor

As many of you know, that there is no requirement of any configuration to set up the second monitor. Though, at times, you may need to configure the monitor that you connect through the Extend mode. So, to set up the second monitor, you need to go to the primary monitor. Then, you can tap on the desktop option. After that, you can navigate to the Display Settings section. Here, you can configure many settings on this single page. For instance, you can move your monitors to replace them. Besides, you can adjust the uneven heights of your monitors.

To proceed with the procedure on “how to connect and set multiple monitors Windows 10?, you need to configure the settings of both the monitors individually. Also, you can modify the resolutions and the layout of your monitors. So, if you are willing to change your primary monitor, you have to pick the number that is relevant to the particular monitor device. After that, you need to tap on the tap on Make this my main display option, and then, you can proceed with the next step. Since you get all the information from the primary monitor. Besides, it helps to host the primary desktop as well. Though you can find the taskbar on multiple monitor devices, the primary is the one that provides better functions to the users. Besides, it is much more accessible.

Next, have to configure some taskbar settings. For that, you can navigate to the taskbar section. After that, you can proceed with the Taskbar Settings. Next, you need to go to the Multiple Display option. Now, you can modify your taskbar settings from here.

Apart from that, you can also get a customized wallpaper for your multiple monitors Windows 10. Also, you can use the same wallpaper for two or more monitors as well. For that, you can search for a number of different wallpaper and pick one of your choice. So, you can go to the Desktop section. Then, you will need to tap on the Personalize option. Next, you can browse for a lot of different wallpaper for your multiple monitors. After that, you can select your preferred wallpaper and then tap on the apply button to set the wallpaper on your monitor. Also, you can select the thumbnail option to decide which desktop you want to set the wallpaper on.

Moreover, if you want to use a single wallpaper for multiple monitors, then we recommend you first to check the resolution of your wallpaper. Besides, you should use a high-resolution wallpaper, so that, it doesn’t display stretchings. Apart from that, you can also manage your wallpaper location through dragging.

Step 3: Hide the Taskbar on the Display

Moreover, if you don’t want to see the applications appearing on the display of your monitor, then you can hide them. To hide the taskbar that you don’t want to have on the display, you can follow the steps right below.

  1. First, you need to right click on the taskbar option.
  2. Then, you can navigate to the Settings.
  3. After that, you have to move to the Multiple Displays option.
  4. Next, you can go to the show taskbar section to hide the taskbar from the display list.

Step 4: Configure the Display Settings

Apart from that, you can configure and manage the display settings of your monitor. Before that, you need to have access to the display configuration. To configure the display settings, we suggest you follow the steps right below for how to connect and set multiple monitors windows 10?

  1. First, to begin with, you need to right-click anywhere on the desktop.
  2. Then, you can move to the Display settings.
  3. After that, you need to tap on the Identify option.
  4. Here, you need to select any one option from the landscape and the portrait and then you can proceed to the next step.
  5. Now, you will get to see various display modes appearing on this page. Here, you can configure your preferred display mode in the monitor.

Therefore, we recommend you to implement all these steps on how to connect and set multiple monitors Windows 10.

Call Us Now
+1-888-220-3424 Request Call Back