Astounding Hacks To Mitigate Windows Error Code 0x8007000d

Windows error code 0x8007000d indicates that there is a file missing in the Operating System. It prevents your device from getting any kind of neither on the device drivers nor in the OS. 

If you are using Windows 10 Operating System for a long time, then you might have the experience of receiving updates on its own. 

This is the most unfortunate situation where an update is available, but you can’t download and install it. In such situations, you might look for permanent solutions to avoid this problem. 

Therefore, you can go through this entire article and avail some of the most effective workarounds that will surely resolve the error you are facing.

Easy Methods to Troubleshoot Windows Update Error 0x8007000d

There can be various ways to troubleshoot this Windows error. But, here, in this section, we are going to discuss some of the most reliable hacks by which you will surely overcome this matter.

You can apply the following ways one after another until you will get the exact solution to eradicate this error.

Fix 1: Use the Program Compatibility Troubleshooter

It is a default feature that exists in all the Windows Operating Systems. If you get this error while installing a particular device driver update, then you can fix it by using this compatibility troubleshooter with that driver.

Step 1: Firstly, launch the File Explorer by pressing the Windows Home key along with E. Then, navigate to the driver setup folder that you are not able to install in your device. 

Step 2: After that, right-click on the Setup file and locate the “Troubleshoot Compatibility” option. Once you are in the Troubleshoot Compatibility section, select the option “Troubleshoot Program” from the resultant menu.

Step 3: On the next screen, you need to choose the driver-related problem that you are experiencing. After that, hit the “Next” button in order to proceed further.

Step 4: Select a backdated version of Windows where the device driver functions properly. Now, select the “Next” option and then the “Test The Program” button from the drop-down list.

Step 5: Thereafter, you need to run the setup as you do normally. If this works, then hit the Yes button and save these settings for this program at the end. 

In case, you still receive the same Windows update error code, then proceed with the next fix.

Fix 2: Use the System File Checker 

Sometimes, such kind of Windows error code can generate due to the missing or corrupted system files. 

In such situations, you can use the System File Checker tool, present in all the Windows OSs. The following are the steps by which you can repair the corrupted or damaged system files.

  • At first, press the Windows logo key along with the X key simultaneously. Choose the option Command Prompt (Admin) from the list and open it.
  • Now, in the Command Prompt window, enter “sfc/scannow” and hit Enter to proceed further. 

Once you successfully execute the command, System File Checker will scan your entire device and look for the corrupted system files. 

If it detects the corrupted or missing system files, then it will repair them automatically.

Note- This process may take some time to finish. So, be patient and don’t interrupt the process while the commands are executing.

Fix 3: Run Deployment Image Servicing & Management (DISM) Tool

In case, System File Checker fails to repair the corrupted system files, then you can run the DISM Tool. 

This is another built-in tool, designed to repair internal bugs and glitches including corrupted system files.

To run this tool, you can follow this section and implement the steps accordingly.

  • Open the Command Prompt (Admin) as you did in the previous fix.
  • Now, in the Command Prompt window, write “dism.exe /online /cleanup-image /scanhealth” and hit the Enter key to execute this command.
  • After that, type “dism.exe /online /cleanup-image /restorehealth” into the Command Prompt window and again press the Enter button.

Once you are done with the above steps, you can close the Command Prompt. Lastly, reboot your device to let the new changes take effect.

Fix 4: Reset the Updating Components Manually

Manually resetting can be another reliable way to resolve such kind of Windows update error. Follow the discussed steps to continue with this method.

Step 1: Initially, you have to open Command Prompt (Admin) in the same way as you did in the earlier methods.

Step 2: Once the Command Prompt window opens, write net stop bits, net stop wuauserv, net stop appidsvc, net stop cryptsvc.

N.B:- After typing each command press the Enter key.

Step 3: After executing these commands, you should remove the qmgr*.dat and enter the following commands into the Run box:

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat

Step 4: Now, write in the other command to navigate to the System32 folder, in this place you require to register the BITS files. 

Next, enter cd /d %windir%\system32 into the Command Prompt window and hit the OK button to execute this command.

Step 5: After finishing this process, you will see a bunch of commands that pop up on the screen. You need to select them and enter into the Command Prompt window. 

The commands are like:

  • regsvr32.exe urlmon.dll
  • regsvr32.exe mshtml.dll
  • regsvr32.exe shdocvw.dll

Step 6: Once you are done, write netsh winsock reset and then again press the Enter button to reset Winsock. Next, type netsh winhttp reset proxy and click on Enter key to reboot the Proxy.

Concluding Remarks:

On the whole, with the help of the above fixes, you will be able to mitigate the Windows update error 0x8007000d.

You should be able to install all the pending updates by now. 

If you have further queries regarding this Windows update error, then feel free to post your doubts in the feedback section below.

On the other hand, you can also seek expert help for further assistance.

+1-888-220-3424 Request Call Back