Asus is one of the leading brands of router available in this professional market. Asus routers left behind its competitors by offering high-quality features and superior connectivity. Being so much popular, it is not free from random flaws.
Asus router power light blinking is a common glitch faced by several users while trying to connect with the computer. If you also face the same error and tired of finding solutions to this issue, then nothing to get worried about this.
Here in this guide, we are going to present some amazing tips and tricks which can help you to fix this issue. Hence, you are advised to have a look at the article given below.
Reasons Behind the Asus Router Power Light Blinking Issue:
Before going to troubleshoot this problem, it’s better to know the reasons behind this issue. If you see the power light of your Asus router blinking orange light, then it might happen due to the several reasons given below:
- Due to the lack of internet connection, you can face this issue.
- If there is any physical problem with the connection, then you might encounter this issue.
- Firmware problem also might be the cause behind this issue.
- Due to the failure of the router hardware, you can also face this problem.
- If the cables of your router are not connected properly with the particular port, then this problem might arise.
Now, you are aware of the root causes which are responsible for this issue. You should try to match the above points with your current situations and identify specific reasons. After knowing the actual cause of your problem, you just need some hacks to troubleshoot this issue.
Quick Tips and Tricks to Solve the Asus Router Power Light Blinking Issue:
Before going to perform any complicated solutions, you should implement the following tricks:
- First, remove the plug of the router from the Power supply. Then, disconnect al the Ethernet cable attached with the Asus router. Wait for a few seconds and reconnect the Ethernet cable and power on the router.
- Restart the router, modem, and the computer. After waiting for a few times, turn them on.
- Reset the router. You can also reset your Asus router by performing the factory reset. Press the Reset button from the back of the router. Hold it for 50-55 seconds and release it.
- Connect the modem directly to the system to access the internet. If it connects the internet directly, then this issue might be associated with the internet service provider.
After performing the above tricks, if you see that the power light still blinks, then proceed with the further methods described below.
How to Solve the Asus Router Power Light Blinking?
There are a lot of ways to fix this issue. Stick to the procedures explained below. Perform the methods one-by-one and check which one is appropriate for you.
Procedure 1: Change the Settings of the Adaptor
If you have changed any settings of the adaptor recently, then you can also face this issue. Hence, check the adaptor and its settings by performing the steps described below:
At first, connect the system with the Asus router by using a wired connection. Then, move the cursor to the bottom left corner of the screen and tap on the Start logo. Look at the left panel of the screen and tap on the ‘Control Panel’ option.
Now, you have to go to the ‘Network and Internet’ section and tap on the ‘Network Connections’ option. Next, you have to click on the ‘Change Adapter settings’ option. Choose the ‘LAN’ from the list of options. Now, you have to right-click on the ‘Properties’ option.
Tick the box that prompts ‘Internet protocol version4(TCP/IPv4).’ Tap on the ‘Properties’ options again. Now, you have to check the settings. The default Subnet Mask and IP Address of the Asus router is 255.255.255.0 and 192.168.1.10.
If you see that the above value does not match the properties, then you should change them. After that, tap on the OK button and close the window.
Now, you should check whether the issue has been resolved or not. If you see that the issue persists, then move on to further solutions.
Procedure 2: Download the Latest Firmware
You need to update the router firmware to check if it can fix this issue. To update the firmware of the Asus router, you should follow the steps provided below:
- Go to the official website of the Asus router.
- Then, type the model number of your router at the box located on the upper right side of the screen.
- Tap on the ‘Support’ button and go to the ‘Driver & Utility’ section.
- Tap on the ‘BIOS & FIRMWARE’ option.
- Now, find the latest firmware and tap on the ‘Download’ button.
- After that, you have to install it by following the on-screen directions.
Restart the system to save the changes and check whether the issue has been fixed or not. If the issue continues, then go to further solutions.
Procedure 3: Upload the Firmware of your Asus Router
You can also fix the Asus router power light blinking issue by updating the firmware of the Asus router. To perform this, you need to follow the steps given below:
At first, disconnect the plug of the router from the power source. Then, press and hold the Reset button for a few seconds. After that, re-plug the Wi-Fi router into the power outlet. Release the button when you see that the Power LED light started to flash.
This light indicates that the broadcast router is in the Rescue Mode. Now, you have to change the Adapter settings by following the first procedure. Then, process with the next step.
Now, navigate to the Start menu and tap on the ‘All programs’ category. Next, navigate to the ‘ASUS utility’ section. Tap on the ‘RT-AC87UWireless Router’ option (it depends on the model name of your router). After that, tap on the ‘Firmware Restoration’ option.
Under the ‘Firmware Restoration’ window, tap on the ‘Browse’ option to select the router firmware that you wish to upload. Tap on the ‘Upload’ button. Now, you have to wait for at least 1-2 minutes.
When you see that the Power LED light is stable, then you have to press the Reset button once again to restore the router to the default settings.
Now, you should check if the problem has been fixed or not. If the power light of the Asus router still blinks, then perform the further method discussed below.
Procedure 4: Download and Install Utility
According to some users, they have fixed this issue by installing the Asus utilities on their system. Hence, you should try this method by performing the steps stated below:
At first, visit the official website of Asus. Move the cursor to the upper right pane of the screen and type the model name of your Asus router in the search bar.
Tap on the ‘Support’ button. In the next window, you have to go to the ‘Driver & Tools’ section. Choose the Operating System that you are using. Tap on the ‘Utilities’ option. Now, you have to search for the ‘Asus Rescue mode’ utility from the current page.
Tap on the ‘Global’ button to download this. It will download as a ZIP file. First, you have to unzip it and click twice on it. Now, install it by following the on-screen guidance. After completing the installation process, tap on the ‘Finish’ button. Close the current window and restart the system to apply the changes.
After that, you should check whether the issue has been resolved or not.
In the above discussion, we have provided some of the easiest solutions to solve the Asus router power light blinking issue. Hope that if you perform the above ways in their given order, then it will surely help you to put an end to this bug.
After implementing the above ways, if you are still not able to connect the router, or if you face any other kinds of trouble, then you can connect with a tech expert. You can share your queries and valuable feedback through the comment section given at the end of this post.